REVolution in RoBOTICS

One robot platform. Every task on your mill floor.

Revbotics builds autonomous mobile robots for spinning mills and factories. One proven base changes its top module to clean the floor, carry yarn cones, move sliver cans and tow your trolleys.

Scroll — the robot drives with you

01Floor cleaning robot

Keeps cotton fly and waste off your floor, every shift.

The base robot picks up its suction module and runs set routes between machine rows on its own, so housekeeping no longer depends on who turned up for the shift.

The problem on the floor

  • Fly and lint settle under machines all day long.
  • Manual sweeping is repetitive and depends on labour availability.
  • Waste on the floor hurts housekeeping and raises fire risk.

How the robot solves it

  • Front suction hood with a centrifugal fan pulls waste in.
  • Waste collects in a porous sack that is quick to empty.
  • A rear squeegee gathers what is left behind.
Detailed specifications are shared with your enquiry or at the demo.Request specifications
  • Same floor, every shiftConsistent cleanliness without a supervisor chasing it.
  • People back on machinesSweepers move to tending and doffing work.
  • Cleaner processLess loose fly drifting back into the line.

02Cone transport robot

Moves yarn cones from winding to packing, without pushing trolleys.

With the peg carrier on top, the same base holds cones upright and delivers them between winding, inspection and packing points on a schedule or on call.

The problem on the floor

  • Cones travel long aisles on hand-pushed trolleys.
  • Rough handling soils and damages finished cones.
  • Machines wait when transport is late.

How the robot solves it

  • Peg carrier keeps every cone upright and separate.
  • Drives mapped routes between pick-up and drop points.
  • Runs on a timetable or when an operator calls it.
Detailed specifications are shared with your enquiry or at the demo.Request specifications
  • Cleaner conesLess handling between machine and pack.
  • No waitingTransport arrives when the doff is ready.
  • Ready for palletizingDelivers straight to the packing or palletizing point.

03Can transport robot

Slides under sliver cans and carries them from carding to draw frame.

The low-profile platform drives under a full can, lifts it, delivers it to the draw frame and brings the empty one back, without disturbing the sliver.

The problem on the floor

  • Heavy cans are pushed by hand, trip after trip.
  • Gaps in can supply leave draw frames waiting.
  • Rough moves disturb the sliver inside the can.

How the robot solves it

  • Low platform slides under the can and lifts it.
  • Carries full cans out and empty cans back.
  • Smooth starts and stops protect the sliver.
Detailed specifications are shared with your enquiry or at the demo.Request specifications
  • Steady supplyDraw frames get cans when they need them.
  • Less strainNo more pushing heavy cans across the floor.
  • Better sliverGentle handling keeps the sliver undisturbed.

04Tug robot

Tows the trolleys you already own.

A tow hitch turns the base into a tugger. It couples to your existing trolleys, pulls them along a mapped route, and drops them where they are needed.

The problem on the floor

  • Loaded trolleys are pulled by hand across the plant.
  • Replacing every trolley with a new system is costly.
  • Long hauls tie up people for unproductive work.

How the robot solves it

  • Hitch couples to your current trolley design.
  • Follows the mapped route and stops at drop points.
  • Drops one trolley and picks up the next.
Detailed specifications are shared with your enquiry or at the demo.Request specifications
  • Keep your trolleysNo new material handling fleet to buy.
  • Fewer long walksPeople stay at their stations.
  • Predictable flowTrolleys arrive on a steady rhythm.

One base · many modules

Swap the top module as your mill's needs change.

Start with the job that hurts most today. Add cleaning, cone, can or tug modules later on the same platform.

Also from RevboticsRetrofit autonomy kit

Already own scrubbers, trolleys or stackers? Make them autonomous.

Our retrofit kit swaps your machine's wheels for our hub-motor wheels and adds a control panel, a lidar and side safety sensors. Your machine then drives itself.

Explore the retrofit kit